Click to Enlarge; Mouse Over to Zoom
Contact a sales agent to assist you with your purchase.
Our staff are available to answer any questions you may have about this item.
(based on 18 reviews)
of respondents would recommend this to a friend.
Most Liked Positive Review
Great product, easy to use
This gun has been a "staple" in our industry for years, but our company uses these almost religiously because of the design and quality. I just wish stores would continue to...Read complete review
This gun has been a "staple" in our industry for years, but our company uses these almost religiously because of the design and quality. I just wish stores would continue to carry this model but they seem to be extinct. CODE FOR PRODUCT: 1776
Most Liked Negative Review
worked for about 2months then quit
at first the new design looked stronger ----- but after two months and two units they quit shooting -- i have tried everything and i ONLY use T-25 staples --no...Read complete review
at first the new design looked stronger ----- but after two months and two units they quit shooting -- i have tried everything and i ONLY use T-25 staples --no off breeds --- i think the gun is not worth buying over again this is my 2nd one the first one was returnable with receipt but i lost the receipt and the store said NO WAY i cannot chance buying another. i have used the older T25 stapler's until they fall apart and they were great now ------------------not so much
Reviewed by 18 customers
Displaying reviews 1-18
Back to top
from Bloomington, IN, USA
I had 2 T50's and 2 T25's that someone helped themselves to. I was pleased to see that the replacements I purchased are of the same top quality as in the past.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Great product, did exactly what I bought it for.
from Ninety Six, SC 29666, USA
I bought this stapler to put down heat wire for under my tile floor. it worked perfectly without damaging the wire. I used a whole box of staples without the tool jamming once.
light weight and very easy to operate.
from Salem, NH, USA
Excellent in small places. Lightness allowed movement of items working on.
PERFECT, WORKS ALL THE TIME!!NOW NEEDS TUNE UP!!
from Houston T.
Raymond GREAT ON PHONE SENDING IN MY T 25 for reconditioning..a bit my other 2 T 50 Great.. Art Squires
from Orlando, FL
This wire stapler is a sound product with great proformance.
from Nashville, TN, USA
While doing holiday decorations this stapler was outstanding product for this job. With depth settings I experienced no wire damage. Making the set up a flawless installation.
from Massillon, OH, USA
I use it for the shooting range and it works for light work
(3 of 3 customers found this review helpful)
I have 3 of those (oldest one 5 years old),
from Rio Rancho, NM
I have 3 of those (oldest one 5-6 years old). I only use OEM T25 staples. All 3 are jamming. Removal of the screw and nut requires little effort, but it slows job significantly. I bough the newer model (T25X) hoping for better results. Nope, the metal lever is not attached to the handle and it sometimes doesn't re-load and I have to manually pull the handle up. I wish this stuff just worked. Frustrating being on the ladder trying to staple alarm or speaker wire when this thing jams.
Bottom Line No, I would not recommend this to a friend
(1 of 1 customers found this review helpful)
Newer staple guns jam too much.
from Clinton Township, MI
I am an alarm installer and have found that the newer T25 staplers do not hold up very well. I can't afford to keep removing jammed staples while doing a job. Quality control must be a nonexistent department.
T-25 stapler jams way too often
from Lamoille, VT
We are a garage door and opener installation company since 1991. Arrow staplers have always been our tool of choice, until the last few years. Our installers refuse to put them in their trucks anymore, too frustrating to deal with the jamming all the time and we use only #256 staples. And I am frustrated with the quantity of T-25s I've bought over the years, thinking that they were being abused, I've since realized, that's not the case, and the guns are the problem, or the staples. Please, go back to the drawing board. I have a box full of "dead" T-25s.
This is a silly product that causes a lot of irritation to its users.
from Nova Scotia, Canada
I purchased it about 18 months and it has never been useful to me. It constantly jams. The local dealer is aware of the situation and has tried to provide assistance. The irritating fact is that it is still on the store shelves.
(6 of 6 customers found this review helpful)
from Okla City, OK, USA
(2 of 2 customers found this review helpful)
My company installs a lot of low voltage wiring (i.e. CAT5e/6, RG6, 16/2 and 16/4 speaker, etc). I have several of the T25 staplers. They constantly jam. We have to take them apart and clear the jam. This wastes a lot of time for the team and is very frustrating. There has to be a quality problem here. I only use the Arrow staples (usually 9/16"). I also have a T59...no better, jams a lot.
Did Arrow change the product?
from Chicago, IL, USA
I am a professional installer for garage door openers and have used this product for 20 years. Well, all of a sudden I am finding myself buying staple guns every other month because my T25 and T18 just stop working. Arrow, you need to seriously look into the quality of this product and the staples you manufacture.
This product is terrible, great for wasting time
from Saugerties, NY 12477, USA
I am using a brand new Arrow T25P staple tool with genuine Arrow staples #256. First, I cannot install a full stack of staples, I have to break off about one inch in order to install the tension spring. Why would you manufacture "Genuine" staples in a stack which doesn't fit properly in a "Genuine" tool? Second, I can only install two staples before the tool jams. I have to climb down my ladder, remove all the staples from the tool and waste time removing a jammed staple.
Used it three times then it broke!,
from Kansas City, KS, USA
I'm an alarm installer and have the T25 for backup and after about the third use then handle went limp and I think the spring broke.... HOPEFULLY THEY HONOR THE WARRANTY.
Jams all of the time
I have been installing low voltage wiring for over 40 years. The older models worked flawlessly however the new T259 has done nothing but jam on every 3RD staple from the day I bought it. It is frustrating to have to remove the jammed staples which ads hours to simple installations.
New T-25 guns constantly jamb.
from pittsburgh, pa.
I am also a garage door installer trying to use these newer staplers for run garage door opener wiring. Well the one I've had for more than twenty years has worked without a hitch or any pampering the whole life of the tool. I have been having all kinds of jambing issues with the newer ones I've purchased over the past five years. I can forget about using these to staple wire to treated lumber or plaster ceilings They constantly jamb and have to be taken apart to clear the jamb. I've wasted more time and staples with the new ones, so much so, that I've given up on them (more than six in the past five years) and either use my old one or resort to hand stapling which I hate for obvious reasons. Quality is less than poor!
Copy and send this link to your friends.
Or share the link with your contacts using:
Just click an icon to sharewith your friends.